Profile
Photobucket

いっらしゃいませ!

ここでは僕の作品のウェブです。

ガンダムやCGや写真が有るよ〜!

よろしくお願いします!

Welcome!

This is a space where I post my work.

In here, you will see Gundam, CG

and photography!

Thanks for coming!
Gallery
Gundam
Photobucket

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket
ありがとう!
Contact me!
Please feel free to contact me for

any enquiry!

お問い合わせはこのメールを送って

下さい! ~(-w- )~

Email
Search form

01/13(金)

Category: None

Comments:

Thousand Sunny
Moving on with life after GBWC...

Received a Thousand Sunny(One Piece) from a friend.
Helping him built this ship since I myself wanted to built too..

This kit has awesome detailing.

Photobucket
The wood grain all sculpted in nicely and quite realistic

Photobucket
The sail also have crease of a real cloth

Photobucket
Pretty impressive accuracy of this model as to the manga's design.


Parts are interchangeable too.

Best is.. the characters...

Photobucket
This is Chopper, the smallest character on the ship...

You can't expect the size to be bigger cause of the scale of the ship. So good luck painting! :D

Despite the great details of this ship... It has many flaws that can make your life miserable.

Photobucket
The bruise mark on the red "wooden" Plastic. Sand that off, you sand your grains off too...

Photobucket
The side barrier, tons of this seam line across the whole ship. How to fix? :(
It can be fixed, but that will be even more work... like really a lot...

Photobucket
The truster is the best, have seamline and bruise on the surface. WAHAHHA D:

Photobucket
The articulation not really perfect. There are parts like this... too much pressure will just break it apart.


So... all in all, this is gonna be a challenging built!

Stay tuned!

12/14(水)

CG

Comments:

Ogre
Just an update of my final project while working in school...

Photobucket
Modelled in Maya 2011, zBrush 4.0, textured with Photoshop CS5

12/01(木)

Gundam

Comments:

Hannya 「般若」FULL WIP COVERAGE
Hi ya guys, it had been some time since GBWC Singapore comes to an ending.
Quite a sad thing for me since I didn't maintain my position this year!

Never mind, I will make a comeback 2 years after my National Service!

I finally have some time to do up my WIP...

Here are the previous 2 links to my previous WIP.
PART 1
PART 2

As mentioned earlier, I will be showcasing all my hand drawn design sketch of Hannya.

Photobucket
the original idea, using a bow (天照 Amaterasu) & some insane mods

Photobucket
head development from 1st version (bottom left corner) to final version (bottom right). Center drawings are the different view of the head.

Photobucket
torso

Photobucket
the hand. my biggest influence came from Linebarrel (refer to WIP PART 1 )

Photobucket
design of the arm

I didn't draw the legs since there isn't much mods done to it as well...

Now is some mods done that is not in PART 1 and 2 of the WIP log...

Photobucket
shoulder armour

Photobucket
extended feet

Photobucket
the fingers that I wanted! but not completed when I shot this photo

Photobucket
tragic accident when Hannya took it's first flight off the table :(

The Katana
Photobucket
the length measured with bandai's original Astray katana

Photobucket
shaping the tip (kissaki 切っ先)

Photobucket
the hand guard (tsuba 鍔)

Photobucket
the completed blade... crazy amount of sanding!

I started off with a 3mm acrylic... and ended my sanding at 2.22mm @_ @



Here are some useful skills I picked up this time round~

Photobucket
using a piece of rough paper, I sticked duct tape on it.
Then I layered some masking tape over for printing.

Photobucket
This method is useful when comes to highly difficult parts that you want to cut out from pla plate.
For my case, the tomoe (refer to PART 2) is one tough piece to cut out.

Photobucket
Here's a size-ratio comparison...

Photobucket
This method is also useful for decal placement testing...

It gives you a more exact sense of how your decal will turn out.
Relying too much on 3D software or Photoshop isn't going to help much in visualisation.
Unless you are like Takuya, the maker of YAMS-130B GREIFER, too much time to spend, then you do 3D visualisation (I swear this 3D model took him one damn long time, I'm a 3D artist too).

Up next... the diorama...

Photobucket
I started off with a simple wood setup. Base from Art friend while woods from Diaso

Photobucket
Then I cover with foam. For this time, I used High Density Foam.
This stuff ain't cheap, but I have tons of leftover from school project last time :D

Photobucket
Good thing about HDF is that, the pinning is strong and doesn't melt upon superglue.
All the pinning you see here are done with... toothpick and satay sticks 'ロ '
Just apply some white glue all over to reinforce the strength and hold.

Photobucket
Next, when all the glue is dry. Apply cheap and domestic wall putty.
You no need high end material to get the effect.
It is just a matter of shaping and sanding afterwards when the putty is cured to get the shape.

Photobucket
Of course when you do rocks like this, there are bound to have tons of empty holes all over.
So if you have Hydrocal, use it to fill up the gaps.
Remember to add a minor amount of white glue to increase the hold of the hydrocal together.

Just bear in mind, while making rock diorama... NATURE IS RANDOM
There is no fixed answer to what you get in the outcome. The more random, the better.

Photobucket
attaining this texture is the first step to get a nice rocky diorama

Photobucket
now is the painting. I used acrylic paint for this diorama.
Using acrylic paint is a good choice since you can do blending of colours with water.
Unlike airbrush, it is easier to control the blending.
Also, it is more natural when you blend with water.

Photobucket
Then when all the blending and painting is done...

You apply an oil wash. For my dio, I used Daler Rowney Oil paints to do the job.
I used Raw Umber for the dark wash and interior shadings and Titanium white for all the white spots you see on my dio.

And when all these paintings are done... time to populate the whole diorama!

Photobucket

Photobucket

Cheap brushes and sponges are used to make vegetation.
With vegetation, the whole diorama will look more convincing.


Ahh... long post indeed....

To end it... I would share some photos of the primed HANNYA.
I always got attracted to the grey shades of a gundam.
Everything just seem so... beautiful.
Alright, here we go~

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket


Photobucket

THANKS FOR VIEWING!

11/22(火)

CG

Comments:

Vue 9.5 Xstream Test
Photobucket

Great day to all, just a simple test I'd done in Vue 9.5 Xstream in school.

The UV of the tree is pretty much screwed... hmmm...

Alright, more renderings coming!

11/16(水)

Gundam

Comments:

Hannya 「般若」GALLERY
Hey guys, how is it going?

I was suppose to update my WIP log a while back...

But I didn't have the luxury of time to do so.

Oh well, just some photos of my HANNYA.

Will do up my WIP soon!

This is the original pose... I believe my joint got loosen on the day itself. Idk why as well, but thanks to leon(as I heard) who helped me reposed. I couldn't be there since I got a shoot going on. Thanks man.

All the photos are taken before chipping and weathering*
Cracks and panel lining are fixed in the end :p*

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket
Designed by OreappDroid